10 Types Of Equipment That Can Be Used For Excavating In Fort McMurray
Excavation equipment is essential for construction. The primary purpose is for moving of earth and in some cases, loading it into carriers. There are different types of excavation equipment, but basically, they can be classified into hand tools and mechanical tools. Your choice of excavation equipment will be dependent on the area of the land and the depth of the excavation needed. Hand tools require manpower to operate while mechanical require either electrical or diesel power.
Below is a list of 10 types of equipment that can be used for excavating in Fort McMurray;
A spade is a hand tool which consists of a metal plate attached to a wooden handle. The plate has sharp edges which allows for easy digging of soil. However, the spade plate possesses less curvature, which does not support the packing of soil.
A shovel is similar and often confused with the spade. It is a hand tool for excavation used for digging and lifting of excavated soil. The difference between shovel and spade is in their leading edge and the curvature of the plate. The curvature of the plate in the shovel is higher when compared to that of the spade. This is what allows the shovel to carry excavated soil more easily.
The hoe is an excavation tool used for small work. A hoe consists of a sharp metal plate attached to a long handle at an acute angle.
The trowel is a hand tool used to dig small trenches or for removing shallow roots in soil
The backhoe can also be called the pull shovel. It is a mechanical type of excavation equipment used for excavating in Fort McMurray. It is used for digging below the machine level. It can also be used for dressing and trimming excavated surfaces. The major parts of a backhoe include; the cab, stick cylinder, boom, stick, bucket and bucket cylinder. The backhoe uses a trawler track base. It is used for digging trenches and pits for basements.
6) Dragline excavator:
These excavators are specialized for digging great depths like that required in port construction, digging of canals or underwater sediment removal. It is made of a large length boom. A powerful cable runs from the cab to the boom and then suspends at the digging bucket.
7) Tracked excavator:
The tracked excavator can also be called the track hoe or hydraulic excavators. The major parts of the machine include; cabinet, boom (first part of the arm), dipper stick (the second part of the arm) and a digging bucket. The machine can rotate 360 degrees. It moves via traction.
8) Wheeled excavator:
The wheeled excavator is similar in many ways to the tracked excavator. The key difference is in the movement. The wheeled excavator moves via wheels, thereby allowing for quicker movement as compared to tracked excavators. It is very suitable for road construction. The disadvantage however is that it is not suitable for hilly areas or uneven grounds.
The bulldozer is about the most powerful and popular excavation machinery used for excavating in Fort McMurray. It is made of hard steel plate with sharp edges. The sharp edge confers the machine with an added advantage of cutting through soil, stumps and other hard surfaces. The bulldozer can have both tracked and wheeled forms of movement.
Just as the name denotes, trenchers are used for digging trenches in the soil. They come in different sizes. The trenches dug are used for several purposes, such as cable laying, pipe laying, digging of drainages etc.
Excavating Fort Mcmurray